|
Post by bugman48 on Apr 18, 2018 12:24:44 GMT -5
Hey guys. On my last bug build, I built everything from the firewall back out of 2x3 tubing and used a stock S10 front clip. Everything was good except I did not and still don't like far outset the front track width is on an S10. So, on this next build, I'm considering narrowing the front portion of the S10 frame approx. 1-1/2" - 2". I will be narrowing the rear portion as well but it will be a bit more than that but that is no big deal. However, by doing this to the front end, that will create center-link & exhaust clearance issues to deal with. I'm pretty confident that I can shorten, sleeve, drill dowel pin holes and weld it crap out of the center-link.
Has anyone attempted this before? thoughts, ideas? Please share........
Thanks ZM
|
|