|
Post by V8 Super Beetle on Apr 14, 2009 16:26:45 GMT -5
I believe so. I think that's all they build them with. Although, I could be wrong.
|
|
|
Post by darrinoddiebear on Apr 14, 2009 20:56:49 GMT -5
Yes it is Mustang II frontend ,manual I didnt want power steering on car just me I like the way you can let go of wheel and it straightens itself back to center and powersterring you can over correct easily."when I was a kidd" I use to play alot and show off in front of girls some HaHa
I have had both and on this project this is the way I am going ,not that I will spin a tire in my toy lol
|
|
|
Post by darrinoddiebear on Apr 14, 2009 23:48:37 GMT -5
On your floors,firewalls,engine compartment did you guys buy out of magazine and cut to fit vw or did you do with flat sheets of metal and try,try,try again system
|
|
|
Post by hellraiser on Apr 15, 2009 1:09:12 GMT -5
the try try try again system sucks lol just my opinion
|
|
|
Post by darrinoddiebear on Apr 15, 2009 7:36:12 GMT -5
That is what I am afraid of, ha
|
|
|
Post by V8 Super Beetle on Apr 15, 2009 9:28:14 GMT -5
You could buy an interior kit from like Jegs and use what you need. It'll be less expensive if you just buy sheet metal, buy some poster board, make your floor templates and then cut it out of the sheet metal. I'm sure you could also buy some full vw pans and cut out what you don't need. I guess it just depends on $$$, and skill.
|
|
|
Post by darrinoddiebear on Apr 15, 2009 22:22:48 GMT -5
The problem I have I cant work on it right now,so instead of doing nothing with it I have to depend on others.I could make my own floor and everything else.but when it comes to some one else doing it I not sure it would turn out like picture in my head haha.I think it would be easier to buy premade and have it installed as I wont be out all labor as in someone else cut and fit and mess up and have to start again I just lost material and man hours and have to do again But I dont want to wait10 years on me part timing it. I plan on having finished by late winter or next spring that is plan
Darrin
|
|
|
Post by hellraiser on Apr 16, 2009 0:13:43 GMT -5
thats good, dont let it sit an go to nuts lol
|
|
|
Post by V8 Super Beetle on Apr 16, 2009 10:23:37 GMT -5
|
|
|
Post by hellraiser on Apr 16, 2009 12:48:51 GMT -5
i wonder if i can get just that tranny hump in steal??
|
|
|
Post by V8 Super Beetle on Apr 16, 2009 16:22:45 GMT -5
I looked and I can't really find anything.
|
|
|
Post by darrinoddiebear on Apr 17, 2009 4:46:36 GMT -5
I like the looks of this sheetmetal,I can put in a few floor braces for support and probably be just fine 1 or 2 under seat and that should be good huh! If it was metal could weld most of it into place
Thanks for link
|
|
|
Post by V8 Super Beetle on Apr 17, 2009 8:38:33 GMT -5
You could weld all the aluminum together, but you'd have to rivet the aluminum to the steel or something along those lines.
|
|
|
Post by darrinoddiebear on Apr 17, 2009 8:54:17 GMT -5
I was looking at wider back fenders and found this,I would like you guys thoughts. I like this look ,what do you think.It has everything in shaved lights to cali-look but has side add ons I cant afford a Ferrari (love to have one) so I guess I Might build a BUGGARI of my own That will make good name on License Plate "BUGGARI" haha
|
|
|
Post by hellraiser on Apr 17, 2009 13:40:43 GMT -5
i think im just gunna mount my seats to the floorboard and the floorboard will b bolted to the supports
|
|